Filter
Top Products
Remove oven shelves and bakeware from oven.
Turn the multifunction selector to oven clean.
Turn the main oven temperature control to
220°C.
THINGS TO NOTE
1. The oven indicator neon will glow until the oven
has reached the desired temperature and then
go out. It will then cycle ON and OFF showing
that the oven temperature is being maintained.
2. The internal oven light will operate when the
selector is set.
3. The cooling fan for the controls will operate after
a short time when oven clean is selected. See
page 15 for more details on the operation of the
cooling fan.
HINTS AND TIPS
Manual cleaning of the Stayclean surfaces is
NOT recommended.
Damage will occur if soap impregnated steel
wool pads, aerosol cleaners or any abrasive
cleaners are used.
Slight discolouration and polishing of the
Stayclean surfaces may occur in time, but this
will not affect their self cleaning properties.
Use the oven clean function for an hour or two
per week to avoid a build up of soilage which
could prevent the stay clean enamel from
working properly.
A good time to use the oven clean function is
after the weekly roast. Simply select oven clean
function as described above and allow the oven
to run for an hour or so.
Surfaces which are not Stayclean coated e.g. the
oven base, the oven exterior etc., will require
manual cleaning. Refer to the Care and Cleaning
Section on page 40 for details.
Useful hints and tips are given on page 40 on
how to keep soilage to a minimum.
33
USES OF OVEN CLEAN FEATURE
During normal use the Stayclean coating within the oven will become splashed with fats and food residues. When
the oven clean feature is selected the Stayclean surfaces burn off any soilage. See Care of Stayclean Surfaces on
page 41 for instructions. Regular use of the oven clean function will keep the Stayclean panels in good condition.
SELECTING OVEN CLEAN
OVEN CLEAN FEATURE