Filter
Top Products
10
Setting the water softener electronically (see table)
The water softener is factory set at position 5.
The dishwasher must
be switched off.
Switch on the
dishwasher by pressing
the On-Off button.
The End light might
flash 5 times, for
example. The flashing is
repeated every 5
seconds.
To change the level,
press the
Programme/Cancel
button. Each time the
button is pressed the
level increases. (Level 1
follows level 10).
The End light indicates
the new setting.
To memorise the
operation, switch off the
dishwasher by pressing
the On-Off button.
Press and hold
Programme/Cancel
button until programme
light 1 flashes and
programme light 2
illuminates with fixed
light.
Wait until programme
light 2 turns off,
programme light 1 goes
on flashing and
simultaneously End
light starts flashing. The
number of flashes of the
End light corresponds
to current level set
117996 79/0en 4-07-2006 18:03 Pagina 10