Filter
Top Products
12
Filling with rinse aid
Open the lid. Fill up with rinse aid.
The maximum level for
filling is indicated by
"max".
Clean up any rinse aid
which overflows. Close
the lid and press until it
locks.
Top up the rinse aid
when the indicator (B)
becomes clear.
CAUTION!
Never fill the rinse aid dispenser with any other
substances (e.g. dishwasher cleaning agent, liquid
detergent). This would damage the appliance.
Adjusting the dosage of rinse aid
Increase the dose if there are drops of water or
lime spots on the dishes after washing.
Reduce the dose if there are whitish streaks
on the dishes or a bluish film on glassware or
knife blades.
Open the lid. Set the dosage level.
(The dose is factory set
in position 4).
Close the lid and press
until it locks.
117996 79/0en 4-07-2006 18:03 Pagina 12