Filter
Top Products
............ www.truemfg.com ............
True Food Service Equipment, Inc.
10
10
INSTALLATION / OPERATION INSTRUCTIONS
True TR, TA, and TG cabinets are available with
four different shelving / tray slide options.
Type Kit #1. Angle Type Tray Slide
Type Kit #2. Rod Style Tray Slide
Type Kit #3. Universal Tray Slide
Type Kit #4. Chrome Shelves & Shelf Supports
Required Tools:
Standard Screwdriver (Flathead)
Rubber / Plastic Mallet
Tape Measure
Installation Procedures (Wire Shelves):
Chrome, Stainless, or PVC coated wire shelves
come with knob style shelf supports (image 1) and
plastic plugs (image 3). Note that heated cabinets
use shelf standards (see page 13).
Screw in the knob style shelf supports in the
desired height (remember all supports will need
to be installed at the same height to keep the shelf
level.
Once the shelves are installed plug the remain-
ing threaded holes with the plastic plugs provided
(see image 3).
PILASTER INSTALLATION & OPERATION
Type Kit #4 Chrome Shelves or PVC Coated Shelves
Pilaster Installation
(Side Wall of
Cabinet)
Pilaster Installation
(Back Wall of
Cabinet / Two
& Three Door
Models)
Pilaster Installation
Two and Three
Door Models
(Middle of Wall in
Rear of Cabinet)
White plastic
plugs go into
the threaded
holes when they
are not used by
the different
shelving sys-
tems. (not avail-
able in heated
cabinets)
1
2
3
4
5
6
Note:
The package containing the pilasters will have the same serial number as cooler. Please check to make sure
these serial numbers are the same. Please see pages 14-15 on shelving diagrams for your specific model.