Filter
Top Products
16 1115WC, 1175WC
Door Reversal
Black model doors may be left- or right-hand opening.
Stainless steel units are not field reversible.
Model 1115WC
To reverse the door, perform the following:
1. Remove the grille and grille cap (two screws).
Figure 18
2. Remove top hinge from cabinet (three screws)
(Figure
18)
. Hold door to keep it from falling.
3. Lift the door off the bottom hinge.
Figure 19
4. Remove bottom hinge from cabinet (two screws)
(Figure 19)
.
Figure 20
5. Remove screws on opposite side of cabinet
(Figure 20)
.
Note that there may be a nut behind one or both
screws on either side.
Figure 21
6. Install hinge on opposite side, bottom of cabinet
(Figure 21)
. Replace nut on back side where installed.
Align hinge outer edge with cabinet before tightening
screws.
Figure 22
ULIN_0143_A
ULIN_0121 _
A
ULIN_0122 _
A
ULIN_0123 _
A
1
ULIN_0109_A
ULIN_016357_30088.fm Page 16 Tuesday, March 14, 2006 2:17 PM