U-Line 15WC Refrigerator User Manual


 
02/2005 3 www.U-LineService.com
15R and 15WC Models
General Precautions
Use this appliance for its intended purpose only and
follow these general precautions along with those listed
throughout this guide:
WARNING
SHOCK HAZARD — Electrical Grounding Required.
Keep the unit unplugged throughout installation
except during testing.
Never remove the round grounding prong from
the plug and never use a two-prong grounding
adapter.
Never use an extension cord to connect power to
the unit.
Always keep your working area dry.
CAUTION
Use care when moving and handling the unit. Use
gloves to prevent personal injury from sharp edges.
Do not lift the unit by the door or door handle.
Do not install the unit behind closed doors or in any
way that would obstruct airflow to the front grille,
which may cause the unit to malfunction.
You have received a carton containing your 15R
Refrigerator or 15WC Wine Captain
®
with a package
inside containing a User Manual and a Product
Registration Card. Complete and mail the Product
Registration Card or register online at
www.U-LineService.com. Once your unit is installed, keep
the User Manual and this Installation Guide in a safe place
for future reference.
15R units are available in Black vinyl clad cabinets with
matching doors and in Stainless models with a stainless
steel door panel, brushed aluminum doorframe and
handle, and a black cabinet. All 15R unit doors have a
slightly contoured handle across the top and are
reversible. The black doors have recessed front panels that
will accept a custom 1/4 inch thick door panel. 15R units
have three full and one “half” tempered glass shelves.
15WC units are Black or Stainless and have a vinyl-clad
cabinet and a framed, reversible, tinted glass door with
a slightly contoured handle across the top and a lock.
Stainless models have a black cabinet and grille and a
brushed aluminum doorframe and handle. All 15WC
units have five fixed wine racks and one “half” tempered
glass shelf.
Please carefully follow the directions that apply to your
unit and your intended design.
Tools/Materials Required
Screwdrivers — slotted and Phillips head
1/4-inch thick door panel material and cutting tools
(15R units)
Inspection
Unwrap and inspect the unit on a flat, level surface
capable of supporting its entire weight.
2 Inspect and Plan