02/2005 5 www.U-LineService.com
™
2015WC/2015WCOL Wine Captain
®
Product Dimensions
Please note that the unit has adjustable feet that can add
one additional inch to height during leveling or to match
adjacent cabinets (see Figure 29 on Page 13).
Door Swing/Clearances Information
Black, White and Wood Overlay units have a zero
clearance for the door to open 90° (see Figure 3).
Stainless Steel models require a minimum of 2-1/8" door
clearance to accommodate the handle if the unit is
installed next to a wall or similar type of structure.
Reversing the Door
(Black and White Units Only)
All U-Line units (except
Stainless Steel models) may
be left- or right-hand
opening. The door opening is
easily reversed by moving the
hinge hardware to the
opposite side. The top hinge
hardware will be used on the
bottom of the other side and
the bottom hinge hardware
will be used on the top of the
other side (see Figure 4).
To reverse the door:
1. Remove top hinge screw
pin from door (7/64"
Allen wrench or Phillips
screwdriver, depending
on your unit’s
construction) (see Figure 5). Remove door by tilting
forward and lifting off bottom hinge pin.
23-1/4"
Including
Wood Overlay
23-1/4"
Including
Handle
34-1/8"
25-3/8"
Including
Handle
14-15/16"
Stainless Steel
34-1/8"
14-15/16"
Wood Overlay
34-1/8"
14-15/16"
Black and White
Figure 2
Wall Wall
21"
16-1/2"
2-1/8" Min.
90°
Door Swing
Stainless Steel
21"
16-1/2"
90°
Door Swing
Black, White and Wood Overlay
1/4" Min.
Figure 3
Figure 4