Filter
Top Products
User’s Manual
14
6. Attach the drawer panel to the wood panel using #10 x 5/8"
(P/N 42121) wood screws and nylon spacers (P/N 42120). The
nylon spacers fit between the wood panel and the drawer panel as
shown (Figure 12).
Figure 12
Drawer panel and wood panel must be aligned properly or
drawer will not operate correctly.
Assembling the drawer and wood panel:
7. Install the overlay panel by sliding the drawer panel back into the
drawer frame.
8. Replace the handle assembly and secure with the two screws
removed in Step 2.
9. Starting at the corners and working toward the center, push the
drawer gasket back into place.
TYPICAL
WOOD
PANEL
PLASTIC SPACER
FIVE REQUIRED
#10 X 5/8" ROUND
HEAD SCREW
FIVE REQUIRED
COATED STEEL
DRAWER PANEL
DWR_OL_005