Vanguard Heating SBVRBN Oven User Manual


 
27
106707
OWNER’S MANUAL
For more information, visit www.desatech.com
SPECIFICATIONS
SBVRBN SBVRBP
21,000-30,000 Btu/h 20,000-28,000 Btu/h
Gas Type Natural Propane/LP
Ignition Piezo Piezo
Manifold Pressure 3.5" w.c. 10.0" w.c.
Minimum Inlet Supply Pressure 4.5" w.c. 11.0" w.c.
Thermal Efficiency 70% 70%
Dimension, Inches/mm (HxWxD)
Stove and Burner System* 27" x 26
1
/4" x 20" 27" x 26
1
/4" x 20"
685.8 x 660.4 x 635mm 685.8 x 660.4 x 635mm
Carton (Insert Only) 23" x 33" x 23" 23" x 33" x 23"
584.2 x 838.2 x 584.2mm 584.2 x 838.2 x 584.2mm
Weight, lbs/kg
Burner System 70 lbs/31.8 kg 70 lbs/31.8 kg
Shipping 75 lbs/34 kg 75 lbs/34 kg
* When installed in Amity cast iron stove body (SCIVFC Series and PSCIVFC Series).
ACCESSORIES
Purchase these stove and burner system
accessories from your local dealer. If they
can not supply these accessories, call DESA
International’s Sales Department at 1-800-
432-2382. for information. You can also
write to the address listed on the back page
of this manual.
WALL MOUNTED
THERMOSTAT CONTROL
KIT GWMT1 (Not Shown)
Allows easy wall access to the operation of
your burner system. This will allow you
thermostatic control with the convenience
of a wall switch.
THERMOSTATICALLY-
CONTROLLED BLOWER KIT
DA3610TA
Provides better heat distribution. Blower
turns off and on automatically, as needed.
Complete installation and operation instruc-
tions included in this manual.
A
U
T
O
O
N
O
F
F
C
O
O
L
E
R
W
A
R
M
E
R
T
E
M
P
RECEIVER AND HAND-HELD
REMOTE CONTROL KIT
GHRC
For all models. Allows the heater to be
turned on and off conveniently.
RECEIVER AND HAND-HELD
THERMOSTAT REMOTE
CONTROL KIT - GHRCTA
Allows the burner system to be operated in
a manually or thermostatically controlled
mode. You can adjust your heat settings and
turn the heater on or off without leaving the
comfort of your easy chair.
WALL MOUNTED ON/OFF
SWITCH - GWMS2
(Not Shown)
Allows burner system to be turned on and
off with a wall switch.