Filter
Top Products
24
Planetary Head Removal
1. Remove the top lid (1), attachment hub (7), the drive belt (2) and the front
....control panel (4).
2
2. The plastic ring (13) can be removed with a screwdriver by pressing it
....between the plastic ring and the frame, and then prying it down.
2 .
3. Remove the rubber ring (10) and the stainless steel cover (12) by prying it
....off with a screwdriver.
2
4. If only the lower part of the planetary head is to be repaired, the planetary
....head can be separated by removing the 3 bolts (11).
3
5. Loosen the set screw and remove the front pulley (3) . A 3 armed pulley
....puller may be required.
6. Take out the 4 screws (5).
7. By loosening and removing the 4 bolts (8), the planetary can be lowered
....and removed. 3