Viking 100 Dishwasher User Manual


 
40
Product Care
Troubleshooting
Problem
Possible Cause and/or Remedy
Dishes are not clean
Improper loading:
Load the dishwasher as suggested in this manual.
Wrong program selection:
Select a program that washes at a higher temperature
or takes a longer amount of time.
Spray arms are not turning:
Check if the spray arms are blocked from moving
freely.
Clogged filters:
Clean all filters as described in this manual.
Filters are not placed in their proper positions:
Check if all filters are placed in their proper positions.
Spray arm nozzles are clogged:
Clean the spray arms as described in this manual.
Overloaded racks:
Do not overload the racks.
Detergent is moist or clumping in box:
Store detergents in a dry location. Close the lid of the
container securely.
Too little detergent:
Increase the amount of the detergent as per the
program table.
Too little rinse agent:
Increase the amount of rinse agent and/or refill the
rinse agent dispenser.
The lid of the detergent dispenser remained open:
Always ensure that you close the detergent dispenser
lid after pouring in the detergent.
Washing cutlery with worn surface quality:
Cutlery of this type is not suited to dishwashers.
Wrong program selection:
Select a program that washes at a higher temperature
or takes a longer amount of time.
Detergent is moist or clumping in box:
Bleaches in cleaners lose their efficiency when stored
under unfavorable conditions. Store detergents in a
dry location. Close the lid of the container securely.
Using cutlery with a low surface quality:
Cleaning of these items is made difficult by their poor
surface structure. Cutlery or dishes of this type are not
for dishwashers.
Tea, coffee, or
other stains