Filter
Top Products
Features: Cycles
Product Controls
13
Features: Cycles
Product Controls
12
Wash Cycles
POTS/PANS
Heavily soiled pots, pans and casserole dishes. Intense pressure, added
wash time and high temperatures.
NORMAL WASH
Normally soiled plates, glasses, bowls, and lightly soiled pots and pans.
Varying pressure levels.
ECONO WASH
Normally soiled plates, glasses, bowls, and lightly soiled pots and pans.
Lower temperature main wash and rinse, using less energy.
LIGHT/CHINA
Lightly soiled dishes or fine china and crystal. Low temperature, shorter wash
and rinse. Varying pressure levels to ensure wash performance and protect
delicate dishes.
RINSE/HOLD
All dishware. Short, non-heated rinse with high pressure.
Options
TOP WASH (450E model only)
Washes dishes on top rack only. Available on Normal Cycle.
HI TEMP WASH
Increases time, temperatures and may add extra water to improve
cleaning performance. Available with Pots/Pans and Normal cycles.
NOTE: When used with Pots/Pans cycle, periods of soaking will occur to aid in
the removal of baked on soils.
ECONO DRY (450E model only)
Selects a “no heat” dry. Available on Normal, Econo Wash and Light
China Cycles.
DELAY START
Lets you delay running the dishwasher. To set “Delay Start”, select the
desired wash cycle and option(s). Press the “Delay Start” key once and
the number “2” will light, indicating a two hour delay. If you desire a
longer delay, continue pressing the “Delay Start” key to the desired
delay time. The corresponding number on the key will light. Once you
have set the desired delay time, press the “START” button and close the
door. “Delay Start” is not available with the Rinse/Hold cycle. Available
delay times vary by models.
Audible Sound Signal
A single beep will occur when you select cycles, options and press the
“START” button. The end-of-cycle signal consists of 2 long beeps. If the
“START” button is not pressed or if the door is not closed within 4
seconds of pressing the “START” button, 3 short beeps will occur. For
all other error messages and to deselect the audible sound signal, see
the Troubleshooting/Fault Codes section.
NOTE: Option, Cycle and Start keys will only illuminate after they are selected.
325E
450E