Filter
Top Products
Operation
19
Settings and Functions
Product Controls
18
Once your refrigerator has left the Sabbath mode, the bale
arm of the ice maker needs to be pushed downward until it is
no longer in the detent. This will restore power to the ice
maker.
Setting the Controls
Set controls precisely with a household thermometer that
includes temperatures between -5Þ to 50Þ F (-21Þ to 10Þ C).
Checking the Temperature (freezer)
Place the thermometer snugly between frozen packages in
freezer section. Wait five to eight hours, then check the
temperature. If the freezer temperature is not 0Þ to 2Þ F
(-17Þ to -16Þ C), adjust the temperature control one number
at a time. Then, check the temperature again in five to
8 hours.
Checking the Temperature (refrigerator)
Place the thermometer in a glass of water in the middle of
the refrigerator. Wait five to eight hours, and then check the
temperature. If the refrigerator temperature is not 38Þ to 40Þ
F (3Þ to 4Þ C), adjust the control one number at a time.
Check again after five to eight hours.
Refrigerator (all units)
CAUTION
To avoid personal injury and property damage, confirm shelf is
secure before placing items on shelf.
CAUTION
To avoid personal injury or property damage, handle tempered glass
shelves carefully. Shelves may break suddenly if nicked, scratched, or
exposed to sudden temperature change.
Spillproof Shelves
Your refrigerator's spillproof shelves are
constructed of polypropylene molded
around the glass and metal rail. This
design means that the shelves are
completely enclosed and liquids can't
seep under the glass. This localizes spills
and makes clean-up easier. Spillproof
shelves also adjust to meet individual
storage needs.
NOTE:
Foods and beverages placed on
the uppermost shelf under the air vent may freeze.
Shelf Adjustment
You can adjust the shelves to match the way you use your
refrigerator. To remove the shelves, tilt the shelf up at the
front releasing the hooks from the shelf support, then pull the
shelf straight out.
To replace shelves, guide the rear hooks of the shelf into the
slots in the shelf supports. Then, tilt the shelf up at the front
until the hooks drop into the slots, and lower the front of shelf
to level position.