Filter
Top Products
Product Controls
17
Product Controls
16
Settings and Functions
To activate the max refrigerator mode, simply press the
“DISPLAY ON”/”ACTIVATE CONTROLS” pads, followed by
the “MAX REF” pad. The indicator light will glow to let you
know you've turned on the max refrigerator mode.
To deactivate the max refrigerator mode before the end of
the four hour cycle, press the “DISPLAY ON”/”ACTIVATE
CONTROLS” pads, followed by the “MAX REF” pad.
Max Freezer Mode
Max freezer mode adjusts the freezer temperature to the
coldest setting for 24 hours, at the end of which, the freezer
temperature automatically returns to its previous setting.
To activate the max freezer mode, press the “DISPLAY
ON”/”ACTIVATE CONTROLS” pads, followed by the “MAX
FRZ” pad. The indicator light will glow to let you know you
have turned on the max freezer mode.
To deactivate the max freezer mode before the end of the 24
hours cycle, simply press the “DISPLAY ON”/”ACTIVATE
CONTROLS” pads, followed by the “MAX FRZ” pad.
Door Open Alarm
Door open alarm sounds and an indicator light blinks if either
door is left open for more than three minutes.
To deactivate the door open alarm, press the “ALARM OFF”
pad or close the door that is open.
High Temperature Alarm
High temperature alarm sounds and an indicator light glows if
the refrigerator or the freezer temperature is too high for two
hours. A blinking light signals which part of the appliance is
affected. The alarm will end when the temperature is brought
back to a proper setting.
To deactivate the high temperature alarm, press the “ALARM
OFF” pad.
ACTIVATE
CONTROLS
MAX REF
DISPLAY
ON
ACTIVATE
CONTROLS
DISPLAY
ON
MAX FRZ
ALARM
OFF
ALARM
OFF
Thermistor Alarm
Thermistor alarm is a special feature that electronically senses
temperatures. The thermistor alarm will sound and indicator
lights will scroll if the thermistor is not operating properly. The
alarm can be deactivated by pressing the “ALARM OFF” pad
on your refrigerator's control panel.
If the alarm continues to
sound, contact an authorized Viking Range Corporation
technician immediately.
Display Lights
To activate temperature display lights, press the “DISPLAY
ON”/”ACTIVATE CONTROLS” pads.
To deactivate temperature display lights, press the “DISPLAY
ON”/”ACTIVATE CONTROLS” pads, followed by the “DISPLAY
OFF” pad.
Sabbath Mode
Sabbath mode is used to disable interior lights and alarms for
observance of the Sabbath.
Before the Sabbath mode is engaged, the bale arm of the ice
maker needs to be raised until it clicks into the detent. This
turns off the power to the ice maker.
To enter Sabbath mode, press the “DISPLAY ON”/”ACTIVATE
CONTROLS” pads to activate the control panel. Then, press
and hold “DISPLAY ON”/“ACTIVATE CONTROLS” and
“DISPLAY OFF” pads simultaneously for three seconds. It will
beep three times and light the three right blue
squares so you
will know that you have activated Sabbath mode.
When your refrigerator is in Sabbath mode, interior lights,
display (excluding the three right
hand side lit blue squares), and
alarms are disabled.
If your refrigerator loses power
while in Sabbath mode, it will return to the Sabbath mode
when power is reestablished.
To exit the Sabbath mode, press the “DISPLAY ON”/
”ACTIVATE CONTROLS” pads. Then, press and hold “DISPLAY
ON”/“ACTIVATE CONTROLS” and “DISPLAY OFF” pads
simultaneously for three seconds. You will then hear three
beeps letting you know that you have turned the Sabbath mode
off.
FRZ
TEMP
FRZ
TEMP
HIGH
TEMP
MAX
REF
MAX
FRZ
COLDEST
...........
DOOR OPEN
Settings and Functions
ACTIVATE
CONTROLS
DISPLAY
ON
ACTIVATE
CONTROLS
DISPLAY
OFF
DISPLAY
ON
ACTIVATE
CONTROLS
DISPLAY
ON
ACTIVATE
CONTROLS
DISPLAY
OFF
DISPLAY
ON