Filter
Top Products
Product Controls
15
14
Settings and Functions
In order for your new refrigerator to work properly, it is
important that you understand its various features, controls,
and how to use them.
Power On/Off Switch (Power Interruption Switch)
The power on/off switch is located behind your refrigerator's
top grille. It is used to turn the power off when cleaning the
refrigerator or changing the light bulbs. Your refrigerator
arrives from the factory with the power interruption switch on.
To turn power off, remove the center grille blade. Press the
power on/off switch to the off position.
To turn power on, press power on/off switch to the on
position. Replace the center grille blade.
IMPORTANT: Be sure the power on/off switch is in the on
position after cleaning or changing light bulbs.
Showroom Mode Initiation
Showroom mode allows electronic controls and interior lights
to function independently of refrigeraton system.
To enter the showroom mode: Press and hold “DISPLAY
ON”/”ACTIVATE CONTROLS” pads; while holding, press and
hold “HIGHER TEMP” and “ALARM OFF” pads together.
Three beeps will sound and unmarked blue light will be lit.
Showroom mode is entered.
To exit the showroom mode: press and hold “DISPLAY
ON”/”ACTIVATE CONTROLS” pads; while holding, press and
hold “HIGHER TEMP” and “ALARM OFF” pads together.
Three beeps will sound and control will revert to normal
operation and display.
Power Switch
DISPLAY
ON
HIGHER
TEMP
ALARM
OFF
ACTIVATE
CONTROLS
Settings and Functions
Electronic Temperature Settings
Your refrigerator's electronic controls are located behind the
door above the cabinet interior. To activate the electronic
control panel, press “DISPLAY ON”/“ACTIVATE CONTROLS”
pads. All other pads, except the “ALARM OFF” pad, will
remain inactive until the “DISPLAY ON”/”ACTIVATE
CONTROLS” pads are pressed. Once activated, pads remain
programmable for at least ten minutes.
When you first plug your new refrigerator in, you will find that
five bars of nine are displayed. This means that all unit
controls are pre-set at the mid-range setting. Wait 24 hours
after plug-in for the cabinets to reach this setting. After 24
hours, you may adjust controls as desired. The warmest
setting displays one bar, while the coldest setting shows nine
bars.
To adjust the refrigerator or freezer temperature, simply
press the “DISPLAY ON”/”ACTIVATE CONTROLS” pads,
then “REF TEMP” pad or “FREEZER TEMP” pad. Press
“HIGHER TEMP” or “LOWER TEMP” pad to adjust
temperature setting one level at a time. Holding down
“HIGHER TEMP” or “LOWER TEMP” pad adjusts
temperature more than one level at a time.
Entry Tone
The entry tone is the “beep” you will hear when you press
one of the control pads.
You can deactivate the entry tone by pressing and holding the
“DISPLAY ON”/”ACTIVATE CONTROLS” pads for three to
five seconds. You will hear three short beeps to let you know
that the entry tone feature has been deactivated.
To activate the entry tone, simply press and hold the
“DISPLAY ON”/”ACTIVATE CONTROLS” pads for three to
five seconds.
Max Refrigerator Mode
Max refrigerator mode adjusts the refrigerator temperature to
the coldest setting for four hours, at the end of which the
refrigerator's temperature automatically returns to its previous
setting.
ACTIVATE
CONTROLS
DISPLAY
ON
ACTIVATE
CONTROLS
DISPLAY
ON
ACTIVATE
CONTROLS
DISPLAY
ON
HIGHER
TEMP
LOWER
TEMP
ACTIVATE
CONTROLS
MAX REF
DISPLAY
ON
Product Controls