Filter
Top Products
SPECIAL FEATURES
13
OPERATING INSTRUCTIONS
Dry Blade Container
If purchased, your dry blade container should only be used for hard, dry materials, such as grain, and for
kneading dough.
1. Make sure that the Variable Speed/Programming Dial is set to 1.
2. Securely fasten the 2-part lid. Always use the complete 2-part lid when blending (unless the tamper is
inserted through the lid plug opening).
3. With the motor o, set the dry blade container on the motor base by aligning it over the centering pad.
Do not ever attempt to put a container on an operating motor base or to operate a motor base without a
container properly in place.
4. Start with the Variable Speed/Programming Dial on 1. Activate the machine by turning the On/O switch
to On (|), then push the Start/Stop switch down and slowly increase to the desired speed. Your container
will shift and get into an aligned position.
5. After turning the machine o, wait until the blades completely stop before removing the lid or container
from the motor base.
6.
Due to the machine’s speed, processing times are much quicker than standard appliances. Until you are
accustomed to the machine, count your time carefully to avoid over-processing.
7. Grinding dry material for more than two minutes could damage your machine. Regular use may result in
cosmetic marring of the container and cause the blades to become dull over time
.
8. Grinding some herbs may release volatile oils, causing the container to discolor permanently. Others have
strong odors that may linger in the container, aecting the flavour of other foods. The grinding of some
herbs and spices may also cause the blade to dull over time, or the container to crack.