Vita-Mix 6300 Blender User Manual


 
15
Container
To prepare your new machine for initial use, follow the steps under Normal Cleaning
below. This will clean the unit, and break-in the motor.
Normal Cleaning:
1. Fill the container half full with warm water and add a couple drops of liquid dish washing
detergent to the container.
2. Snap or push the complete 2-part lid into locked position.
3. Select variable speed 1. Turn the machine on and slowly increase the speed to High.
4. Run the machine on High speed for 30 to 60 seconds.
5. Turn o the machine, and rinse and drain the container.
To Sanitize:
1. Follow Normal Cleaning instructions above.
2. Fill the container half full with water and 1 1/2 teaspoons of liquid bleach.
3. Snap or push the complete 2-part lid into locked position.
4. Select variable speed 1. Turn the machine on and slowly increase the speed to High.
5. Run the machine on High speed for 30 to 60 seconds.
6. Turn o the machine, and allow mixture to stand in the container for an additional 1 1/2 minutes.
7. Pour bleach mixture out. Allow container to air dry.
8. Do not rinse after sanitizing.
Lid and Lid Plug
Separate the lid and lid plug. Wash in warm soapy water. Rinse clean under running water,
and dry. Reassemble before use.
IMPORTANT: To ensure continued and eective performance, do not put the container, lid, or lid
plug in the dishwasher.
SPECIAL FEATURESCARE AND CLEANING