Filter
Top Products
14
Wet Blade Container
Designed for processing liquids including juice, frozen mixtures, sauces, soups,
purées, batters, and for wet chopping.
1. Make sure that the Variable Speed dial is set to 1.
2. Load the container before placing it on the motor base. Place liquids and soft foods
in the container first, solid items and ice last. Although not necessary for blending,
you may want to cut or break food into smaller pieces for more precise measuring
of ingredients.
3. Securely fasten the 2-Part lid. Always use the complete 2-Part lid when blending
(unless the tamper is inserted through the lid plug opening). Especially when
blending hot ingredients, make sure that the lid is securely latched.
4. With the motor o, set the wet blade container on the motor base by aligning it
over the centering pad. Never attempt to put a container on an operating motor
base or to operate a motor base without a container properly in place.
5. Start with the On / O Switch in the On position. Always start your machine on
Variable Speed 1. Activate the machine by lifting up the Start / Stop Switch to the
Start ( ) position and slowly increase the Variable Speed to the desired speed.
Your container will shift and get into an aligned position.
6. If the mixture stops circulating, you may have trapped an air bubble. If inserting the
tamper through the lid plug while blending does not release it, reduce the speed on
the dial to Variable Speed 5. Use the tamper to stir until it “burps.” If these methods
do not work, stop the motor, remove the container from the motor base, and use a
rubber spatula to press the air bubble away from the blades. Return the container
to the motor base, replace the lid, and continue blending.
7. Take proper care when handling and processing hot ingredients and making
hot soups and sauces.
8. Due to the machine’s speed, processing times are much quicker than standard
appliances. Until you are accustomed to the machine, count your time carefully to
avoid over-processing.
9. After turning the machine o, wait until the blades completely stop before removing
the lid or container from the motor base.
OPERATING INSTRUCTIONS
CAUTION
Never Start on Speeds Above 1 with Hot
Liquids to Avoid Possible Burns.
Escaping steam, splashes or contents may scald.
To secure the contents, lock the lid and lid plug
securely in place prior to operating the machine.
Always start on Variable 1, slowly increase to 10.