Filter
Top Products
16
8. Take proper care when handling and processing hot ingredients and making
hot soups and sauces.
9. Due to the machine’s speed, processing times are much quicker than standard
appliances. Until you are accustomed to the machine, count your time carefully
to avoid over-processing.
10. After pressing the Start / Stop switch to stop the cycle, wait until the blades
stop completely before removing the lid or container from the motor base.
Dry Blade Container
Before using this container for programs or the Variable Speed option, always begin
with the Variable Speed Dial pointed at the Stop Symbol ( ) at the top of the dial.
If purchased, your dry blade container should be used only for hard,
dry materials, such as grain, and for kneading dough.
1. Load the container before placing it on the motor base.
2. Securely fasten the 2-part lid. Always use the complete 2-part lid when
blending (unless the tamper is inserted through the lid plug opening).
3. With the motor off, set the dry blade container on the motor base by aligning
it over the centering pad. Do not ever attempt to put a container on an operating
motor base or to operate a motor base without a container properly in place.
4. To begin, make sure the On / Off switch is in the On position.
5. Use the Variable Speed dial to select a function.
• Variable Speed: Rotate the dial right of center to Variable Speed 1.
• Programs: Rotate the dial left of center to the desired program.
6. Activate the machine by pressing the Start / Stop Switch. Your container will
shift and get into an aligned position.
• Variable Speed: slowly increase the Variable Speed to the desired speed.
• Programs: The programs vary in blending speed and duration and will
automatically stop at the end of the program. Programs can be interrupted
by pushing down the Start / Stop switch at any time. If reactivated by pushing
down the Start / Stop switch, the program will start at the beginning.
OPERATING INSTRUCTIONS