Filter
Top Products
11
The T&G 2 Blending Station
®
advanced electronic control can be custom programmed by using the
control panel. The two different programming instructions are explained below:
Programming One of the Six T&G 2 Blending Station
PRE-SET buttons
1. Press the OWNER CONTROL button (Vita-Mix Logo).
2. Press the PULSE High/Low buttons to scroll thru the ‘RECIPE’ numbers.
3. Press the number of the button for programming. (For a description of each recipe refer to
T&G 2
Blending Station 34 Programming Options
insert included with your machine.)
For Example: If you wanted to program Button One with Recipe #17
1. After pressing the OWNER CONTROL button. The DISPLAY
SCREEN will say “RECIPE 1-34”.
2. Then repeatedly press the “H” PULSE button until the screen
displays “RECIPE #17”.
3. Then press the ONE button to apply Recipe #17.
4. Either continue programming the other five buttons or press the
OWNER CONTROL button to exit and continue blending.
Re-Programming ALL Six T&G 2 Blending Station Buttons
to the same program
Re-programming all of the buttons will erase any individual programs set
using the instructions above.
1. Press the OWNERS CONTROL button (Vita-Mix Logo) and HOLD until “REPROGRAM ALL” appears
on the screen.
2. Press Button One to Six to re-program all
the buttons to a family of similar blending cycles.
• Press Button One for program SMOOTHIE -
Blends drinks with just juice and ice.
• Press Button Two for program SMOOTH 2 -
Blends regular smoothies for an extended cycle.
• Press Button Three for program COFFEE-
Blends light coffee drinks.
• Press Button Four for program SHAKES -
This cycle is good for ice cream and milkshakes.
• Press Button Five for program COCKTAIL-
Blend margaritas, daiquiris.
• Press Button Six for program OTHER -
Specialty drinks, using frozen fruit and other hard ingredients for a
thick but consistent drink.
ustom Programming