Filter
Top Products
3
13. Always operate with the lid in place.
14. Display window area will scratch when contacted with a scouring pad or
sharp object. Use a soft cloth to wipe the control panel area clean.
15. The T&G 2 Blending Station
®
cannot be cleaned with a water jet.
16. Installation for a 120 VAC unit requires you to have at least one 20 amp
outlet per machine, available within six feet of the T&G 2 Blending
Station. 220 VAC and 100 VAC units require a dedicated line. Consult
an electrician for proper electrical needs.
Enjoy the safety of this grounded appliance. The T&G 2 Blending Station
U.S. power cord comes equipped with a three-prong (grounding) plug which
mates with a standard three-prong wall outlet (Figure A). This cord will vary for
countries outside the United States.
Adapters (Figure B) are available for two-prong outlets. Do not cut or
remove the third (ground) prong from the plug or power cord.
Consult your electrician if you are not sure if the wall outlet is grounded
through the building wiring. With a properly grounded two prong wall outlet,
ground the T&G 2 Blending Station by attaching the tab on the adapter to the
wall outlet cover by means of the screw in the center of the cover (Figure B).
SAVE THESE INSTRUCTIONS
Figure A
Figure B
THREE PRONG
ADAPTERS ARE
NOT TO BE USED
IN CANADA.