Vulcan-Hart C24EA5 208/240V PRO Electric Steamer User Manual


 
MODEL C24EA - GENERAL
F25213 (May 2006)Page 5 of 52
Other chemical properties in water supplies can also affect good steam generation and vary from within each state
and locality.
The water level probes in the steam generator tank use ions in the water to detect the water level. Do not use fully
demineralized or de-ionized water since it is non-conductive and the water level can not be detected.
NOTE: The use of strainers, or filters will not remove minerals from the water.
Steamers that operate over a long period of time without the benefit of properly conditioned water, which have
developed a heavy scale build up, should be cleaned before connecting to a conditioned water supply.
REFERENCE MATERIAL
For replacement parts, refer to Catalog of
Replacement Parts F-43123.
For operation, care and cleaning instructions, refer to
Installation and Operation Manual F-35428.
LUBRICATION
Component Lubrication Type
Heating Element
Screws
Never Seez
All NPT Fittings Pipe Thread Sealant, Loctite
565
Door Handle
Sliding Bracket
Lubriplate 630AA
TOOLS
Standard set of hand tools.
VOM with A/C current tester (any quality VOM
with a sensitivity of at least 20K ohms per volt
can be used).
Anti Static Kit, part no. TL - 84919.
Special
Torque Wrench - Capable of measuring
70 in*lb.
Aluminum Foil Tape - (McMaster-Carr Part No.
7631A21) or equivalent.
Pressure Gauge Assembly
Low Pressure Gauge - 0 to 5 psi.
recommended (Grainger Part No. 2C641).
Water Hose Coupling - swivel type
(Grainger Part No. 4KG87).
Reducer Bushing (Grainger Part No.
6MN61).
Pipe thread sealant (as required).