Vulcan-Hart ML-126452 Oven User Manual


 
– 16 –
Turning the Buzzer Off
Press .
Setting the End Time (Delayed Start)
Assume roasting time is one hour and fifteen minutes and it is currently 2 o'clock. If you want to finish
roasting at 4:00, program as follows:
1. Press and hold while pressing or to adjust the time to 4:00.
Colon in display will flash.
Time display will show cooking time.
2. Press .
Cooking will begin at 2:45. Colon starts flashing.
Roasting stops at 4:00; buzzer sounds. Press to silence.
If after pressing the end time comes earlier than the current time + the program time, a beep will
sound (for three minutes) and program will not start.
Programmed end time is now cancelled.
When is pressed again, program starts in the normal way.
Setting an Early Warning Buzzer
You can program an early warning buzzer for basting or whatever reason.
This function is completely independent of any program, whether it is running or not.
Buzzer always sounds for three minutes.
As soon as you press when buzzer is not engaged, the current time or the already programmed
time will be shown in the display.
Press or at the same time to program the moment when the beep tone will sound.
Minimum is the current time.
Maximum is the current time minus 1.
Buzzer delay time can always be changed as long as the beep tone has not sounded.
As soon as a beep tone sounds as a result of the elapsed buzzer delay time, the programming
is cancelled.
Stopping the Rotisserie
Press .
Heaters, operator side lamp, and rotisserie will turn off.
To start rotisserie again, see procedures described under "Interrupting a Processing Cycle".
PREPARING THE PRODUCT
Oven is not designed to roast frozen foods.
Use only fresh or previously thawed product.
Clean all work areas before and after preparing poultry.
Maintain proper sanitation at all times.