Vulcan-Hart VG60 Range User Manual


 
— 10 —
4. Exercise caution when placing brick in a thermostatically controlled griddle section. DO NOT hit thermostat
bulb while installing bricks. The thermostat bulb is a sensitive device and may be easily knocked out of
adjustment.
Into the 6
1
/2" (165 mm) wide baffle, install:
a. Two 10" x 4" (254 x 101.6 mm) bricks, placing the miter edge, one to each side of the front burner baffle
area (Fig. 4).
b. Two 7" x 4" (177.8 x 101.6 mm) bricks, one to each side of the rear burner baffle area (Fig. 4).
Fig. 4
5. Into the 9
7
/8" (251 mm) wide baffle, install:
a. Two 10" x 4" (254 x 101.6 mm) bricks, placing the miter edge, one to each side of the front burner baffle
area (see Fig. 4).
b. Two 7" x 4" (177.8 x 101.6 mm) bricks, one to each side of the rear burner baffle area (see Fig. 4).
6. If burner has been strapped down, remove the wire strapping device, using wire cutters.