Vulcan-Hart VG60 Range User Manual


 
— 23 —
INSERTING AND REMOVING STANDARD AND CONVECTION OVEN RACKS
The oven rack has a stop to keep the rack from being pulled all the way out when unloading product. To install
rack, place rack along side of top of side liner runners and slide rack completely to the rear of the oven
compartment until rack drops into place (Fig’s. 21 & 22).
Fig. 21 Fig. 22
To remove rack, reverse the procedure above by raising rear of oven rack stop above runner and pulling rack
forward (Fig. 23).
Fig. 23