Filter
Top Products
— 10 —
PL-41123-1
TIME DISPLAY
TEMPERATURE DISPLAY
BELT SWITCH
TIME KNOB
POWER SWITCH
SET POINT
TIME RANGE
SWITCH
SET POINT ARROWS
CONTROL CIRCUIT FUSE
DRIVE MOTOR FUSES
SET POINT
INDICATOR
LIGHT
ALTERNATE CONTROLS (Fig. 4)
Temperature Display — Displays actual oven cavity temperature during cooking cycle.
Set Point — Push to display set temperature.
Set Point Arrows — Press the Set Point button so that the set point is displayed, and at the
same time, press the Set Point Arrows up or down until the desired set
point temperature appears in the digital display. Release the Set
Point button. The actual oven cavity temperature will display.
Set Point Indicator Light — When lit, indicates that the heat is being provided to the oven. When
set point is reached, light will go off.
Time Display — Displays actual cooking time in minutes and tenths of minutes.
Time Range Switch — Use to set cook time range from 2 to 8 minutes, 8 to 15 minutes, or 15
to 20 minutes. Switch must be on cook time range desired in order to
change belt speed.
Fig. 4