Filter
Top Products
— 9 —
Belt Switch — Push switch to ON to start the conveyor belt; push to OFF to stop the
conveyor belt.
Power Switch — Push to ON to start the oven; push to OFF to stop the oven. When the
power switch is pushed to ON, ignition occurs automatically.
Time Knob — After the Time Range Switch has been set to the desired time range,
turn the knob clockwise to increase the cook time or counterclockwise
to decrease the cook time until it reaches the time desired on the time
display.
Fig. 3
Cycle Time — This is a service control only. Do not touch this control.
Man. Reset — This is a service control only. Do not touch this control.
Set Point — Set point adjustment control. To adjust the set point, locate the Set
Point knob behind the door flap. Press the Read Set Point button so
that the set point is displayed, and at the same time, turn the Set Point
knob until the desired set point temperature appears in the digital
display. Release the Read Set Point button. Do not make any other
adjustments to this control.
Prop. Band — This is a service control only. Do not touch this control.
PL-41124-1
SET POINT
CYCLE TIME
MAN. RESET PROP. BAND
DOOR FLAP