Filter
Top Products
VCH & VRT SERIES OVENS F-41162 (03-14)
9
QUICK CYCLE
The Oven is pre-programmed with
default settings of:
Cooking Time - 60 minutes
Cooking Temperature - 350⁰F
Holding Time – 60 minutes
Holding Temperature - 165°
To start Quick Cycle:
1. Switch ON/OFF Switch to ON.
Wait approx.. 3 seconds until
Cook Temp. starts blinking.
2. Push Start Button.
MANUAL OPERATION
The Oven and its parts
are hot. Be very careful when operating,
cleaning, or servicing the oven.
1. Switch ON/OFF Switch to ON
position.
Wait approx. 3 seconds
TIME (IN MINUTES) starts blinking.
2. Turn ADJ/SET Knob to desired
cook time.
3. Push ADJ/SET Knob to set
cooking time.
Cook Temp. starts blinking.
4. Turn ADJ/SET Knob to desired
cook temperature.
5. Push ADJ/SET Knob to set
cooking temperature.
Hold Temp. starts blinking.
6. Turn ADJ/SET Knob to desired
holding temperature.
7. Push ADJ/SET Knob to set
holding temperature.
8. Push the Start Button.
SETTING ADJUSTMENT
At any time you can adjust the setting
by:
1. Push the ADJ/SET Knob until
the desired setting flashes.
2. Turn the ADJ/SET Knob to
desired time/temperature.
3. Push the Start Button to set
your changes.