Filter
Top Products
VCH & VRT SERIES OVENS F-41162 (07-10)
7
OPERATION
CONTROLS
The Oven and its parts
are hot. Be very careful when operating,
cleaning, or servicing the oven.
All operating controls are located on the
front Control Panel(s). The oven is
supplied with individual operating
controls for each oven cavity.
ON/OFF TIME COOK HOLD CABINET
SWITCH TEMP. TEMP. TEMP.
ADJ/SET KNOB START HEAT
BUTTON INDICATOR
LIGHT
Power On / Off Switch
The power On/Off switch turns the oven
on or off.
TIME (IN MINUTES)
Displays set time.
COOK TEMP.
Displays set Cooking Temperature.
HOLD TEMP.
Displays set Holding Temperature.
CABINET TEMP. (PROGRAM#)
Displays interior temperature, displays
programming number in programming
mode.
ADJ / SET
ADJ / SET Knob allows Adjustment and
Setting changes.
START
Start Button will start the operation or
pre-set settings.
BEFORE FIRST USE
1. Thoroughly clean the oven
before initial use. Please refer
to cleaning instructions in this
manual. (Pg. 13)
2. Test the oven to verify that the
oven operates normally. Please
refer to “Testing The Oven”
procedure in this manual. (Pg.9)
MANUAL OPERATION
The Oven and its parts
are hot. Be very careful when operating,
cleaning, or servicing the oven.
1. Switch ON/OFF Switch to ON
position.
Wait approx. 3 seconds
TIME (IN MINUTES) starts blinking.
2. Turn ADJ/SET Knob to desired
cook time.
3. Push ADJ/SET Knob to set
cooking time.
Cook Temp. starts blinking.