Filter
Top Products
6
INSTRUCTIONS FOR USE
MAKING ONE WAFFLE
1. Plug cord into 120V AC wall outlet.
2. Press top of the rocker switch to turn unit on (rocker
switch will light, indicating that the unit has power).
3. Turn browning control knob to the desired setting.
4. The waffle maker will now begin the preheating
process. This should take approximately six
minutes. When the waffle maker is ready for baking,
the green indicator light located on each
of the upper and lower waffle grid covers will light,
and the waffle maker will sound six beeps. (This is
for first waffle of each baking session.)
NOTE: When baking two waffles at the same time,
the wafflemaker will beep 3 times to indicate when
each waffle is ready. The green indicator light located
on the waffle grid cover will also be illuminated.
5. Preheat your Waring
®
Pro Belgian Waffle Maker on
setting #4 or preferred setting (green indicator lights
located on waffle grid cover will be illuminated when
preheated).
6. For best results, do not open waffle maker
during cooking process. Doing so will offset the
timing mechanism.
7. Using the recipes provided, fill the measuring cup
to the top. Pour batter evenly into the center of the
waffle grids. Use a heatproof spatula to spread the
batter evenly over the grids.
8. Close top cover and rotate the waffle grids 180°.
9. The green Ready indicator will turn off.
10. When the waffle is baked to the set darkness, the
unit will beep three times and the green indicator
light will illuminate.
11. Rotate waffle grid with the lit indicator light to the
top position.
12. Raise top cover and remove the baked waffle.
13. Repeat if making additional waffles.