PREPARATION PRIOR TO OPERATION (continued)
9
PREPARE FILTER RESERVOIR
Install SUCTION TUBE O-RINGS, FILTER PAPER and FILTER
PAPER HOLDER into RESERVOIR.
Install assembled FILTER RESERVOIR in place a bottom of FRYER.
Install DRIP PAN (item 17) into mounting bracket behind fryer door.
Close DRAIN VALVE (item 11) by turning lever to horizontal position.
FILTER
PAPER
HOLDER
FILTER
PAPER
FILTER
SCREEN
(clip inserts into
drain opening)
FILTER
RESERVOIR
RESERVOIR
ASSEMBLY
CROSS-SECTION VIEW
“O” RING
STORAGE FOR 3
SPARE “O” RINGS
“O” RING IN
“O” RING GROOVE
WARNING:
SLIP/FALL HAZARD
DO NOT OPERATE UNLESS DRIP PAN IS INSTALLED.
Oil will drip on the floor and slips/falls will result.
Death or serious injury may result from slipping and falling in spilled oil.
WARNING
WARNING:
SLIP/FALL HAZARD
CLOSE DRAIN VALVE BEFORE FILLING WITH OIL.
Unless drain valve is closed, oil poured into kettle will drain into
reservoir or onto the floor. Oil spill may occur.
Death or serious injury may result from slipping and falling in spilled oil.
WARNING
362 301626 OpManual for WFPE-30F Electric Pressure Fryer