Filter
Top Products
Useful Tips
ì Before adding ingredients to the “Bowl” during operation, turn the “Rotary Speed
Control” to a lower speed. Always add the ingredients through the “Flour Feeder”.
ì When adding flour to recipes, mix at a low speed until incorporated.
ì Mixtures with large quantities of liquid should be mixed at lower speeds to avoid
splattering.
ì Be sure to watch liquids closely while whipping, since the powerful 450-watt
motor beats quickly.
ì When using the mixing bowl to knead or mix a recipe designed to be prepared by
hand, you will find that with the Westinghouse stand mixer you can usually place
all the ingredients in the mixing bowl at once. When doing this, always place the
liquids in first. This will assure more thorough mixing.
Special Note
When your work with the attachment is completed, turn the “Rotary Speed Control” (3)
to off position “O”. The mixer will keep turning for approximate 3 cycles to its park
position before the mixer head completely stop. This is the normal operation and
allows you to slowly lift the beater from the mixer. This special operational design
provides for a smooth stop to the rotary action and extends the life of the appliance.
Then unplug the unit from an electrical outlet.
Care and Cleaning
Always unplug the appliance after each use and before attempting to clean. Failure to
do so can result in broken bones , cuts or electrical shock.
1. Make sure the “Rotary Speed Control” is set to ‘O’ and the appliance is
unplugged before cleaning.
2. Wait until the motor head has come to a complete stop; when switched off, the
motor head will continue to turn for a brief period.
3. Please do not place hands into mixing bowl until the appliance comes to a
complete stop in order to prevent possible injury.
4. Press the “Mixer Head Release Button”(1) and lift the “Mixer Head”(5) up.
5. Remove attachments by pressing them up as far as possible, then turn
counterclockwise to release. Pull from the attachment post.
6. The “Bowl” and attachments can be washed in warm, soapy water or in a
dishwasher. Attachments are top rack dishwasher safe.
7. Wipe down the “Mixer Head” and main unit with a damp cloth. DO NOT immerse
the unit, power cord and plug in water or liquid. Do not use an abrasive or
cleaning pad on the mixer base.
8. DO NOT use household cleaners that contain bleach or pine cleaners. Do not
use any type of solvent-based cleaner or metal polish on the mixer base. Do not
spray cleaners directly on the mixer. Cleaners should be applied to a clean cloth
before using on the mixer. If these cleaning products DO come in contact with the
mixer, immediately clean with a water-dampened cloth and wipe dry.