Filter
Top Products
CARE AND CLEANING
TO REMOVE AND CLEAN THE FILTERS
Warning! Switch the appliance off
before you carry out any cleaning
operation.
Dirty filters decrease the washing results.
Although the maintenance is very low with
these filters, we recommend that you regu-
larly check the filters and clean them if nec-
essary.
1. To remove filter (A), turn it counterclock-
wise and remove it out from filter (B).
A
B
2. Filter (A) has 2 parts. To disassemble
the filter, pull them apart.
3. Thoroughly clean the parts under run-
ning water.
4. Put the 2 parts of the filter (A) together
and push. Make sure that they assem-
ble correctly in each other.
5. Remove filter (B).
6. Thoroughly clean filter (B) under running
water.
7. Put filter (B) to its initial position. Make
sure that it assembles correctly under
the two guides (C).
C
8. Put filter (A) into position in filter (B) and
turn it clockwise until it locks.
CLEANING THE SPRAY ARMS
Do not remove the spray arms.
If the holes in the spray arms become clog-
ged, remove remaining parts of soil with a
thin pointed object.
EXTERNAL CLEANING
Clean the external surfaces of the appliance
and control panel with a damp soft cloth.
Only use neutral detergents. Do not use
abrasive products, scouring pads or sol-
vents (e.g. acetone).
INTERNAL CLEANING
We recommend, every 3 months to run a
washing program for heavily soiled dishes.
Use detergent, but do not put dishes in the
appliance.
WHEN THE APPLIANCE IS NOT TO BE
USED FOR A LONG PERIOD
1. Disconnect the mains plug from the
mains socket.
2. Close the water tap.
3. Leave the door open to prevent un-
pleasant smells.
4. Keep the inner side of the appliance
clean.
14 westinghouse