Filter
Top Products
EN15
Shortly before cooking time finishes, the oven prompts you to check that the food is cooked to your
satisfaction. If it is not, extra time can then be added manually by turning the “Browse” knob.
INDUCTION FUNCTIONS
Thanks to the Induction Heating technology, the oven offers several cooking functions (see Function
Description table) which guarantee high cooking performances together with a very fast cooking process
and low energy consumption.
In order to ensure optimum performance, use the induction plate in combination with the supplied
stainless steel cooking vessel (see Inserting Wire Shelves and Other Accessories in the Oven for
information on how to insert both the induction plate and the cooking vessel).
To start the Induction functions etc. navigate the main menu (refer to Selecting Cooking Functions or
press the induction direct access icon).
To access the induction functions on the user interface, the induction plate must be properly inserted into
the oven.
If an induction cooking cycle is required but the induction plate or cooking vessel are not inserted, the
appliance will detect the absence of one or both and will advise that they be inserted before proceeding:
1. Turn the function knob to Induction Functions
2. Select the food category to be cooked with the browse knob from the proposed list and confirm
using .
3. According to food category, further subcategory and/or food weight may be selected by turning the
browse knob and confirm with .
4. Press button to confirm.
5. Place the food in the oven and press .
6th Sense Induction Functions
Some cooking functions (Roasted Meat, Roasted Poultry and Fish) are 6th sense assisted. Given the weight
of food to be prepared, 6th sense technology cooking suggests the cooking time. Cooking time may be
adjusted to fit personal preferences and for some meat categories refers to a rare preparation (see
Induction Oven cooking tables for more details).
SETTINGS
1. To change some display settings, select “SETTINGS” from the main menu by turning the “Functions”
knob.
2. Confirm by pressing : the display shows which settings can be changed (induction first alert,
language, volume of acoustic signal, display brightness, time, energy saving function).
3. Select the setting to be changed by turning the “Browse” knob.
4. Press button to confirm.
5. Follow the instructions of the display to change the settings.
6. Press button ; a message appears on the display confirming your selection.
N.B.:When the oven is switched off, if the ECOMODE (Energy saving) function is selected (ON), the display
switches off after a few seconds, showing the clock. To view information on the display and switch the light
on again, just press any of the buttons or turn one of the knobs. During a cooking function if the ECOMODE
is activated the cavity lamp will be switched off after 1 minute of cooking and reactivated for each user
interaction. If, on the other hand, the function is not selected (OFF), after a few minutes the display is merely
dimmed.
KEY-LOCK
This function can be used to lock the buttons and knobs on the control panel.
To activate it, press and at the same time for at least 3 seconds. If activated, the functions of the
buttons are locked and the display shows a message and the symbol . This function can also be activated
during cooking. To deactivate it, repeat the above procedure. When the key-lock function is activated, the
oven can be switched off by turning the knob to 0 (zero). In this case, however, the previously selected
function will have to be set again.