The oven light
The Oven Light will come on when you
open the oven door. To turn the light on
when the oven door is closed, push the
Oven Light Switch on the control panel.
Push the switch again to turn off the
light.
Electrical Shock And Personal
Injury Hazard
. Make sure oven and light bulb are
cool and power to the oven has
been turned off before replacing
the light bulb. Failure to do so
wuld result in electrical shock or
bums.
n
The bulb cover mud be in place
when using the oven. The cover
protects the bulb from breaking,
and from high oven temperatures.
Because bulb cover is made of
glass, be careful not to drop it.
Broken glass could cause injury.
To replace the oven light:
1. Unplug appliance or disconnect at
the main power supply.
2.
Remove the glass bulb cover in the
back of the oven by pushing the
wire holder to the side and pulling
out the glass cover.
3. Remove the light bulb from its
socket. Replace with a 40-watt
appliance bulb.
4. Replace the bulb cover and snap
the wire holder in place. Plug in
appliance or reconnect at the main
power supply.
NOTE:
Make sure the oven light is off
during the Self-Cleaning cycle. Keeping
oven light on will shorten bulb life.
Page 18