Filter
Top Products
Drying
Option
Selects
3r Switcl h
Before starting your dishwasher
1. Spin the Lower Spray Arm to make sure
nothing will stop it from turning freely
2. Be sure nothing blocks the center area in
the bottom rack. The center wash tower
extends through this area during the
cycle.
3. Run hot water at sink nearest dishwasher
until it is hot, then turn it off.
4. If you have a disposal in the sink, run it to
clear any food scraps, then turn it off. This
will insure good drainage.
Starting your dishwasher
A
9)
. ,,GH. Wb”
NORMAL WASH Cycle...
1. Select a drying option.
2. Turn the Cycle Control Knob so that it
points to NORMAL WASH.
3. Latch the door to start the cycle.
LIGHT WASH Cycle...
1. Select a drying option.
2. Turn Cycle Control Knob until it points to
LIGHT WASH.
3. Latch the door to start the cycle.
RINSE & HOLD Cycle...
1. Select AIR DRY Option only.
2. Turn the Cycle Control Knob clockwise
until it points to RINSE & HOLD.
3. Latch the door to start the cycle.
Changing a setting
You can change a setting anytime during
any cycle.
1. Unlatch the door to stop the cycle.
2. Turn the Cycle Control Knob clockwise to the
cycle you want.
3. Be sure the detergent dispensers are filled
properly for the new cycle.
4. Latch the door to start the cycle.