Filter
Top Products
Selecting a cycle
. Door latch-After closing tl
latch all the way to the righi
and turns on the dishwasher
‘Cl
e Cor
itrol Knob
he
door, move door
‘. TI iis lot :ks the door
NORMAL WASH Cycle
A double wash for normal to heavily
soiled loads. (The Energy Guide
Label data is based on this cycle.)
Cycle time is about 70 minutes.
LIGHT WASH Cycle
For lightly soiled or pre-rinsed loads.
Cycle time is about 60 minutes.
RINSE & HOLD Cycle
For rinsing a few items to be washed
one or more days later. Cycle time is
about 15 minutes. Use AIR DRY only.
HEAT DRY or AIR DRY?
If the HEAT DRY Option is selected, air In the
dishwasher is heated during the “dry” part of
the cycle.
Some Items (such as plastics) may need towel
drying
If the AIR DRY Option is selected, air in the
dishwasher is not heated. Using this option helps
save energy, but dishes take longerto dry [over-
night] and some water spotting may result
To add a dish after starting
4.
1. To be sure the added item is washed and
rinsed, make sure the Cycle Control Knob has
not passed LIGHT WASH.
2. Unlatch the door to stop the cycle, but don’t
open it until the spray arm stops spinning.
3. Open the door and add the dish.
5.
Close the door. Do not latch it. Wait 30 sec-
onds for air in the dishwasher to warm up. This
helps reduce theamountofmoisturethatcan
come from the vent when restarting the
cycle.
Latch the door. The dishwasher will start from
where it stopped.
9