Filter
Top Products
83. Remove the metal junction box and save the
2 mounting screws.
a. Bend back ears of 3 wire plug on ice maker
wiring assembly.
b. With the green wire up, snap the plug into
hole in side of junction box.
c. Connect the 3 wire plug into mating part
in junction box. Remount metal junction box.
WARNING-DO NOT PINCH WIRES BETWEEN
JUNCTION BOX AND CABINET.
WHITE AND TAN
WIRES
84. Place split grommet (#939033) around wiring
assembly and push into cabinet hole. Seal
space between wiring and grommet with per-
magum sealant.
B5. Route white and tan wires behind con-
denser to unit compartment. Remove screw
from cabinet. Place clamp (#939009) around
both wires and attach to cabinet with the screw
just removed. Hold wires away from screw
when tightening.