Whirlpool ECKMF-28 Ice Maker User Manual


 
C. INSTALLING WATER VALVE
ON LOWER BACKOF CABINET LEG.
STEP Cl
,U6?6074
WASHER
TUBING
Cl. Plug wiring assembly into water valve so that
the two parts fit together tightly.
C2. Fasten water valve to cabinet leg with 1 screw
(#488649).
w
Ii49
C3. Attach valve ground wire to cabinet with ground
screw (#488500).
C4. Slide retaining nut (#627018) over tubing.
Push tube insert (#841707) into end of
tubing. Push end of tubing into water valve.
Tighten the retaining nut, but do not
overtighten.
C5. Attach copper tubing and hose connector
(#936192) to water valve. Be sure that rubber
washer is in place and tighten hose connector.
Attach copper tubing to refrigeratorwith sleeve
(#836074), clamp (#510716), and screw
(#488645).
C6. Remove cardboard or tape (installed in step
A61 from top of condenser.
-/STEP C5