Filter
Top Products
Using your refrigerator
’ -INDICATOR’LIGHT
\
REFRiGERATdR CONTROL
POWER SAVING CONTROL
\
LIGHT SWITCH FREEZER CONTROL
Setting the controls...
Controls forthe refrigerator and freezer are in the
Give the refrigerator time to cool down com-
refrigerator. When the refrigerator is plugged in for
pletely before adding food. (This may take sev-
the first time...
1.
Set the REFRIGERA-
TOR CONTROL TO 4.
2. Set the FREEZER
eral hours.]
These settings should be about right for nor-
mai household refrigerator usage.
The controls will be set about right when milk or
juice is as cold as you like and when ice cream is
Refrigerator Control adjustments range from 1 to
8. Freezer Control adjustments range from A to D.
Changing the control settings...
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart below.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
QUESTIONS?
call you;
If Refrigerator
COOL-LINE” Section is
service
TOO COLD
assistance
telephone
If ICE isn’t
number
MADE FAST ENOUGH
(page 151.
If BOTH SECTIONS
are TOO WARM
Power Saving Control...
The Power Saving Control on the Control Con-
sole operates electric heaters around the door
openings. These heaters help keep moisture from
forming on the outside of the refrigerator.
POWER SAVING CONTROL
COIiiUMti
iltchcti
. LESS
L”IEPS”P *
t*itPG” b.oNIIu*k
REASON:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough]
Controls not set correctly
for your conditions
RECOMMENDED
CONTROL SETTINGS:
Refrigerator
6
Freezer D
Refrigerator
4
Freezer
A
Refrigerator 2
Freezer
A
Heavy ice usage
Very cold room temperature
[can’t cycle often enough]
Door opened often
Large amount of food added
Very warm or very cold
room temperatures
Refrigerator
4
Freezer
A
Refrigerator
6
Freezer
C
1. Use the “CONSUMES LESS ENERGY” setting when
humidity is low.
2. Use the “REDUCES EXTERIOR MOISTURE” setting if
moisture forms on the outside of the refrigerator.
The indicator light will glow when the switch is in
the “REDUCES EXTERIOR MOISTURE” position.