Filter
Top Products
Adjusting the crisper humidity con
You can control the amount of humidity in the
moisture-sealed crisper.
1. The control can be adjusted to any setting
between LOW and HIGH.
2. LOW (open] lets moist air out of crisper for best
storage of fruits and vegetables with skins.
3. HIGH (closed] keeps moist air in the crisper for
best storage of fresh leafy vegetables.
,.a,
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items.
To remove glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace glass shelves:
I. Guide the rear hooks into the slots in
2. Tilt up front of shelf until hooks drop
Lower front of shelf to level position.
: I r.UC” i ! ,*1s,wce4r;*ii 3~
To remove the shelf:
1. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order.
To adjust the shelf:
1. Remove shelf.
2. Remove supports by sliding upwards.
SHELF SUPPORT
3. Replace supports on desired level.
4. Replace shelf.
,
Removing crispers and crisper cover...
PULL OUT TO STOP, LIFT THE FRONT
Ii31
AND PULL AGAIN
I, 11,
To remove the
CCISpect:
6
GLASS IS HEAVY.
BE CAREFUL.
REMOVE THE
GLASS INSERT,
the shelf
into slot,
1. Slide crisper straight out to stop, lift front, then
slide the rest of the way out.
2. Replace in the reverse order.
To remove the cover:
1. Push up glass insert from bottom, then slide out
with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Remove metal cover support.
To replace the cover:
1. Replace metal cover support on wall supports
in front section of cabinet
2. Fit back of corner into notch supports on walls of
refrigerator, then lower into place.
3. Slide back of glass insert into place, then lower
front.