Filter
Top Products
Changing the light bulb...
Removing the freezer basket.. .
For proper air movement, keep the freezer basket
in place when the freezer is operating.
To remove the basket:
l
Slide out to the stop.
l
Lift the front to clear the stop.
l
Slide out the rest of the way.
To replace the basket:
l
Place basket on the slides.
l
Make sure the wire stops
clear the front of theslides.
l
Slide basket in.
_ sr.5.
.,_iWl. ..,, _ .: .l,cl.:
~ ,,, .& ,., a,. ,-
The key eject lock...
can help reduce the hazard of child
entrapment.
WARNING: To avoid possible electrical shock,
first unplug freezer or turn off elec-
tricity leading to freezer at the main
power supply.
I. Remove the light shield from the side of the control
panel. Depress the back of the shield to release the
tabs, then pull away.
2 Replace bulb with a do-watt appliance bulb.
3. Replace the light shield Insert the shield tabs in the
slots, then press the shield to snap into place.
4. Plug in power cord or switch on electricity
. .
To lock or unlock the freezer you must hold the
key in the lock while turning The lock is spring
loaded so the key cannot be left in the lock
If the key is lost, contact your WHIRLPOOL
dealer for a replacement Always grve the com-
plete model and serial number of your freezer
when requesting a replacement key
The signal light...
automatically warns of any unexpected
power failure.
Signal light
/
If the signal light is not glowing, immediately check:
l
for power interruption,
l
for an unplugged power cord,
l
for a burned out signal light.
To replace burned out signal light:
I. Unplug power cord from outlet.
2. Open the freezer door
3. Unplug burned out light and replace with one of
same wattage and size. Signal light can be or-
dered from vour WHIRLPOOL dealer, Part No.
6