Filter
Top Products
27
PROBLEM
The burner fails to light
The burner flames are
uneven
The burner flames lift off
the ports, are yellow, or
are noisy when turned off
The burner makes a
popping noise when on
SURFACE BURNERS
CAUSE
•
The control knob is not set correctly. Push in the control knobs before turning
them. Make sure the control knob is turned to the Light position. (See page 6.)
•
You have blown a household fuse or tripped a circuit breaker.
•
The burner ports may be clogged. Clean them with a straight pin. (See page 24.)
•
The burner ports may be clogged. Clean them with a straight pin. (See page 24.)
•
The burner caps may not be positioned properly. (See page 24.)
•
The burner needs cleaning. (See page 23 and 24.)
•
The air/gas mixture is incorrect. Contact an authorized service technician to
check the air/gas mixture or see the Installation Instructions.
•
The burner is wet from washing. Let it dry.
TROUBLESHOOTING
WHEN SELF-CLEANING YOUR OVEN
PROBLEM
The Self-Cleaning cycle
will not work
CAUSE
•
The door is not closed all the way.
continued on next page