Whirlpool GH7208XR Convection Oven User Manual


 
18
MANUAL COOKING
Add 30 Seconds
The ADD 30 SEC. control automatically starts the oven at 100%
power for 30 seconds, and adds 30 seconds of cook time, up to
10 minutes, with each additional touch of the control. Time may
be added in 30-second increments by touching ADD 30 SEC., or
by minutes and seconds using the interactive touch screen
display. Cook power or cook time may be changed after cooking
begins by using the “Adjust Settings” control. While settings are
being adjusted, the countdown freezes, and then resumes when
adjustments are made.
Microwave Time/Power Cooking
The MICROWAVE TIME/POWER control is for manual
microwave-only cooking.
To Use MICROWAVE TIME/POWER:
1. Touch MICROWAVE TIME/POWER control pad.
2. Touch “+” or “-” controls, or use number pads to enter the
cook time in minutes and seconds.
If using 100% cooking power, skip Step 3.
3. Touch “Power: 100%,” and then use “+” or “-” controls, or
use number pad to adjust the power level, between 10% and
100%.
4. Touch “Start” on the touch screen, or START control.
The display will count down the cook time.
During the countdown, cook time and/or cooking power may
be changed by touching “Adjust Settings” on the touch
screen, and following the prompts.
When the cycle ends, the end-of-cycle tones will sound,
followed by reminder tones.
5. Touch CANCEL control or open the door to stop reminder
tones. The display will return to the Main Menu after CANCEL
control is touched.
Convect Time/Temp Cooking
The CONVECT TIME/TEMP control is for manual convection or
combination cooking.
The cook time may be set in hours and minutes. The temperature
may be set to 100°F (38°C), or from 225°F (107°C) to 450°F
(232°C) in 5-degree increments.
NOTE: The microwave cooking power may be set to 0%, 10%,
20% or 30%. The default power is 0%.
To Use:
1. Touch CONVECT TIME/TEMP control.
2. Touch “+” or “-” controls, or use number pads to enter the
cook time in hours and minutes.
3. Touch “Temp: 350°,” and then use “+” or “-” controls, or
number pads to enter temperature, if cooking at a
temperature other than the default 350°F (177°C).
4. Touch “Power: 0%,” and then use “+” or “-” controls, or
touch number pad to set microwave cooking power, if
cooking at a power level other than 0% (10%, 20% or 30%).
5. Touch “Start Preheat” on the touch screen to preheat empty
oven. If preheat is not needed, touch “Skip Preheat” after the
oven starts.
The display will count down the cook time.
During the countdown, cook time, temperature and/or
cooking power may be changed by touching “Adjust
Settings” on the touch screen, and adjusting the remaining
time and/or the cooking power.
When the cycle ends, the end-of-cycle tones will sound,
followed by reminder tones.
6. Touch CANCEL control or open the door to stop reminder
tones. The display will return to the Main Menu after CANCEL
control is touched.
Time/Temp/Power Cooking
The Time/Temp Power control on the Main Menu is for manual
cooking by cooking method. There are 12 methods from which to
choose. Some of the methods have set power levels that cannot
be changed. Use the following chart as a guide.
METHOD COOK
WITH
COOKWARE POWER/TEMP
SETTINGS
Reheat Microwaves
only
Microwavable 10-100%; 100%
default
Defrost Microwaves
only
Microwavable 20% only
Cook Microwaves
only
Microwavable 10-100%; 100%
default
Bake Convection
only
Ovenproof,
convection
rack
100°F (38°C),
225° (107°C)-
450°F (232°C);
350°F (177°C)
default
Grill Grill and
microwaves
Ovenproof,
microwavable,
grill rack,
Sizzle Pan
0-40%; 0%
default
Melt Microwaves
only
Microwavable 30% only
Roast Convection,
microwaves
Ovenproof,
microwavable,
convection
rack, Sizzle
Pan
225°F (107°C)-
450°F (232°C);
350°F (177°C)
default
0-30%; 0%
default
Simmer
Cook
Microwaves
only
Microwavable;
SUREMIST™
steamer
vessel
Enter desired
time.
Sizzle Pan Microwaves
only
Sizzle Pan 100% only