Filter
Top Products
The cooktop light:
Electrlcal Shock Hazard
Turn off power at maln
power supply before re-
plaolng the light bulb.
Failure to do so could re-
sult In electrical shock.
The Oven Light:
Electrical Shock Hazard
Turn ofl power ut maln
power supply before re-
placing the light bulb.
Failure to do so could IB-
suit In electrical shock.
5. lift
up
the bulb holder.
2. Remove the bulb cover
mountlng screws.
3. We recommend replaclng
bulb(s) wlth candelabra-
base 30-watt bulb(s) avall-
able from your authorlzed
WhirlpwlsM servlce com-
pany (Part No 4158432).
2. Remove the vent cover
mounting screws.
3. Tip the cover forward, then
lift out to remove.
4. Remove bulb holder
mountlng screw
6.
We recommend replacing
bulb with candelabra-base
30-watt bulb available from
your authorized WhirlpoolIM
service company (Part No.
4158432).
7. Replace the bulb holder
and mounting screw.
8.
Slide the top of the vent
cover into place. Push the
bottom until It snaps Into
place. Replace the mount-
ing screws. Turn the power
back on at main power
supply.
21