Filter
Top Products
The COOK lndlcator Llght will come on
and the Dlspiay will show four 0’s.
2. Touch COOK.
nnn
UrcEia
The display will
-==-=I 30seconds.
show the numbers you
touched in the order you touohed
them. The example shows 1 minute,
3. Touch Number Pads for
cooking fime you want.
4.
Touch START.
d
count
0Wt-l
The oven will automaffoaily cook af
HIOH Cook Powor.
The COOK lndlcator Light will stay on
lo show that the oven Is cooklng In the
cycle.
The Display counts down the time to
show how much cooklng time Is left.
When the cooklng time ends, “End” will
show on the Display and 4 beeps will
sound. (You can stop the beeping by
openlng the door or by touching
CANCEL) “End” will remain on the
Display and a reminder tone will
sound every 60 seconds (to remind
you that food is left In the oven] unttl
the door Is opened or CANCEL is
touched. The Dlspiay will then show
the time of day.
Changing the Cooklng Time
Cooking time can be changed any tlme before touching START or durlng the cycle:
1. Touch COOK.
2.
Touch numbers for the new time.
3. Touch START.
Cook will continue cooking for the new time.
Cooking at Lower Cook Powers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the
slower the cooklng. Each Number Pad also stands for a different percentage of Cook Power.
Many recipes In your MICRO MENUS@ Cookbook tell you, by number, which Cook Power to use.
Recipes In other books and magazlnes may tell you by name (HI. MED, LO, etc.] or
percentage (lo%, 50%, 80%, etc.].
The following chart gtves the percentage of Cook Power each Number Pad stands for, and
Cook Power name usually used.
automatic
100% of full power HIGH
9 = 90% of full power
8 = 80% of full power
7 = 70% of full power MEPHIGH
6 = 60% of full power
8
5 = 50% of full power MED
4 = 40% of full power
3 = 30% of full power MEDLOW
2 = 20% of full power
1 = 10% of full power LOW
0 = no power (fan and light will be
off)