Filter
Top Products
Microwave oven controls
There are four parts in the control section:
-The Digital Display/Clock and Indicator
Lights
- Command Pads
- Number Pads
-Fan and Light Pads
When you first plug in the oven, a tone sounds
and the Display will show 88:88. If after you set
the Clock (page 6), the Display again shows
all 8’s; your electricity was off for a while.
Reset the Clock.
Instructions for each control are covered on the
following pages. Read them carefully.
Digital
Display/Clock
and Indicator
,-+ lights
When you are not
using the micro-
wave oven, it is
an accurate
Digital Clock.
When you are using
the microwave
oven, it displays
time settings,
Indicator Lights
and shows you what
Number Pads you
touched.
7 Command Pads
//
Touch Command
Pads to tell the micro-
wave oven what to do
and in what order. A
few examples:
-CLOCK SET tells the
oven you are going
to set the clock.
-START tells the clock
to start.
See page 6 for
information on the
tone you hear when
touching any pad.
Each Command Pad
(except START and
CANCEL] lights an
Indicator Light on the
digital display.