Filter
Top Products
When the cooklng tlme ends, “End” will
show on the Display and 4 beeps will
sound. (You can stop the beeplng by
openlng the door or by touching
CANCEL] “End” will remaln on the
Display and a remlnder tone will
sound every 60 seconds (to remind
you that food Is left In the oven) until
the door Is opened or CANCEL Is
touched. The Display will then show
the ttme of day.
Changing the Cook Power
The Cook Power can be changed any time before touching START or durlng the cycle.
l Touch COOK POWER.
l Touch a number for the new Cook Power.
l Touch START. The cycle will cook at the new Cook Power for the orlglnal ttme.
OR...
l Touch COOK POWER twice if you want to change a lower Cook Power to HIGH.
l Touch START.
Using AUTO SET
Auto Set TIME and TEMP are preset cooklng cycles which store commonly used cooklng
times and probe temperature sefflngs.
Auto Set TIME
Auto Set TIME provldes ten preset ttmes. One to nlne mlnutes at HIGH Cook Power can be
selected by touching TIME and the corresponding Number Pad (l-9). You do not need to
touch any addltlonal Number Pads as you do when uslng COOK1 or COOK 2. Thls
provldes a short-cut method for sefflng commonly used cwklng nmes.
The Auto Set Chart Included wlth your microwave oven and the Auto Set Gulde on the
Inner door panel help you use TIME to cook varlous food Items wlthout havlng to look up
the cooking times.
A preset tlme of 2 minutes, 30 seconds at HIGH Cook Power is avallable by touching just
the TIME Pad. The tlme may be changed to any tlme from O-99 minutes, O-W seconds,
allowlng you to store your favorite cooklng tlme and Cook Power, or to pm-program the
oven for someone else to cook an already prepared dlsh at a laterttme. See page13 for
Instructions.
DO THIS...
THIS HAPPENS...
1. Put
food In the oven and
close the door.
2.
Touch TIME.
(Optlon: Skip to Step 6 If
you want to use the pre-
set cooklng time and
Cook Power.)
conttnued on next page