Filter
Top Products
The Display will show the numbers
you touched In the order you
touched them. The example shows
1 minute, 30 seconds.
d
count
awn
The oven will automatically cook at
HIGH Cook Power.
The COOK 1 indicator Light will
stay on to show that the oven is cook-
ing in the first cycle.
The Display counts down the time to
show how much tlme is left in the first
cycle.
When the cooklng time ends, “End” will
show on the Dlsplay and 4 beeps will
sound. (You can stop the beeplng by
openlng fhe door or by touching
CANCEL.) “End” will remain on the
Dlsplay and a reminder tone will
sound every 60 seconds (to remlnd
you that food Is left In the oven) until
the door Is opened or CANCEL Is
touched. The Dlsplay will then show
the ttme of day
Changlng the Cooklng Time
Cooking tlme can be changed any time before touching START or during the cycle:
1. Touch COOK 1.
2. Touch numbers for the new time.
3. Touch START.
Cook 1 will continue cooking for the new time.
Cooking at Lower Cook Powers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the
slower the cooklng. Each Number Pad also stands for a different percentage of Cook Power.
Many recipes in your MICRO MENUS@ Cookbook tell you, by number, which Cook Power to use.
Recipes In other books and magazines may tell you by name (HI, MED, LO, etc.) or
percentage (lo%, 50%, 80%, etc.).
The followlna chart alves the percentaae of Cook Power each Number Pad stands for, and
Cook Powername &ally used. -
automatic 100% of full power HIGH
4=
9 = 90% of full power
3=
8 = 80% of full power
2=
7 = 70% of full power MED-HIGH
1=
6 = 60% of full power
o=
5 = 50% of full power MED
40% of full power
30% of full power MED-LOW
20% of full power
10% of full power LOW
no power (fan and light will be offJ
continued on next
page