Filter
Top Products
Changing the Pre-programmed Setting
You can change fhe pre-progmmmed cooklng time and Cook Power In Auto Set TIME to the tlme and
power you most often use. To change the Auto Set TIME setting, follow these steps:
1.
Touch Auto Set TIME twice.
2. Touch the Number Pads for the new desired cooklng time. If HIGH Cook Power Is deslred, sklp to Step 5.
3.
Touch COOK POWER.
4. Touch the Number Pad for the deslred Cook Power.
5. Touch START. The oven will start. If food is not to be cooked at this time. touch CANCEL The new ttme
and Cook Power will be stored In memory for future use. NOTE: If elecirlc power ever goes off, the
oven will go back to the pi-e-programmed 2 mlnuter, 30 seconds at HIOH Cook Power setting.
Auto Set TEMP
Auto Set TEMP provldes ten preset probe temperatures (see “Cooklng with the Tempem-
ture Probe” on page 19). One-hundred ten (110) to one-hundred ninety (190) degrees
at 70% Cook Power can be set by touching TEMP and the corresponding Number Pad
(l-9). You do not need to touch any addltlonal Number Pads as you do when uslng
COOK 1 or COOK 2. Thls provldes a short-cut method for setltng commonly used probe
temperatures.
The Auto Set Chart Included wlth your mlcrowave oven and the Auto Set Gulde on the
Inner door panel help you use TEMP to cook varlous fwd items without havlng to look up
the temperatures.
A preset temperature of 165°F at HIGH Cook Power Is avallable (after lnsettlng fhe probe]
by touching Justthe TEMP Pad. This temperature may be changed to any temperature
from 90°F to 200°F allowlng you to store your favor& cooklng temperature and Cook
Power, or to preprogram the oven for someone else to cook an already prepared dlsh at
a later tlme. See page 14 for Instructions.
DO THIS...
THIS HAPPENS...
1.
Put iood In the oven and
close the door.
The AUTO SET and PRCBE TEMP Indlca-
tor Lights will come on and the Display
will show 165°F (or the temperature you
2. Touch TEMP.
(OPtiOn:
Sklp to Step 6 It
You want to use the pre-
set temperature and
Cook Power.)
have set as your favorite cycle).
The Dlsplay will show what you
touched In degrees Fahrenhelt.
Thls example shows 140°F.
4. Select a Cook Power.
(Optlon: Sklp to Step 6 If
you want to ceek at 70%
power.)
To select a Cook Power other than
70%, touch cooi< POWER.
The COOK POWER lndlcator Light will
come on and the Dlsplay will show
“P-701’ This shows the oven Is pre
programmed to cook at 70% power.
continued on next page 13